Ocean-optics DAQ700 Bedienungsanleitung PDF herunterladen

DAQ-700 PCMCIA A/D Converter

The DAQ-700 PCMCIA A/D CONVERTER is a 12-bit analog-to-digital converter card that connects our

spectrometers to notebook PCs. This 16-channel single-ended, 8-channel differential card -- also known by its

National Instruments DAQCard-700 designation -- fits into a slot in a notebook PC.

You must first configure your computer to properly detect and use the DAQ-700 and then follow several steps to

use it as an interface to your Ocean Optics spectrometer. Because A/D converter installation goes hand-in-hand

with software installation, directions for installing OOIBase32 Spectrometer Operating Software are included.

Install OOIBase32

Before installing OOIBase32, make sure that no other applications are running.

1. Execute Setup.exe. At the “Welcome” dialog box, click Next>.

2. At the “Destination Location” dialog box, accept the default or choose Browse to pick a directory. Click Next>.

3. At the “Backup Replaced Files” dialog box, select either Yes or No. We recommend selecting Yes. If you

select Yes, accept the default or choose Browse to pick a destination directory. Click Next>.

4. Select a Program Manager Group. Click Next>. At the “Start Installation” dialog box, click Next>.

5. Follow all prompts regarding the Spectrometer Configuration diskette that came with your system. For more on

the Spectrometer Configuration diskette, see the

Note below. (If you downloaded OOIBase32 from the Ocean

Optics web site, you will not have this diskette. Select No when first asked about the diskette.)

6. At the “Installation Complete” dialog box, choose Finish>.

7. When prompted to do so, restart your computer when the installation is complete.

8. Do not run OOIBase32 at this time. Your computer must be properly configured to use the DAQ-700 before

you can use OOIBase32.

Note:

In your spectrometer shipment box, you received a Wavelength Calibration Data Sheet wrapped around a

floppy diskette. The Wavelength Calibration Data Sheet and the spectrometer configuration file on the floppy

diskette contain the same information, which is unique to your spectrometer. When you install OOIBase32,

you are prompted to insert this diskette into your computer so that this data is installed with the software.

However, if the diskette is ever lost, or if you downloaded OOIBase32 from the our web site and did not

receive one, use the data on the Wavelength Calibration Data Sheet to enter into OOIBase32 fields.

Install NI-DAQ

1. Insert your NI-DAQ version 6 CD into your CD-ROM drive.

2. Aa setup program should automatically start. If it does not, run the Setup.exe program from the CD.

3. The installation program has an option called Install NI-DAQ. Select that option.

4. In the “Select Components” dialog box, make sure NI-DAQ Driver Files (Minimal Install) is checked.

Choose any of the other options you wish to install. Click Next>.

5. Accept the default destination directory and the default Program Group.

6. In the “Ready to Install” dialog box, click Next>. When prompted to do so,

RESTART YOUR COMPUTER.

Install the DAQ-700

1. After the computer restarts, wait until all disk drive activity stops -- that is, wait until your computer is

completely restarted. Connect the spectrometer cable between your DAQ-700 and your spectrometer.

2. Insert the DAQ-700 into any available PCMCIA slot.

Installation Instructions: DAQ-700 (for Windows 95/98 Users)

-1-

1 2 3 4 5

Inhaltsverzeichnis

Seite 1 - DAQ-700 PCMCIA A/D Converter

DAQ-700 PCMCIA A/D ConverterThe DAQ-700 PCMCIA A/D CONVERTER is a 12-bit analog-to-digital converter card that connects ourspectrometers to notebook P

Seite 2 - Configure the DAQ-700

3. You should hear two tones of increasing pitch. If you do not, and you do have internal speakers in your notebookcomputer, try turning the speaker v

Seite 3 - Run OOIBase32

A dialog box giving the current hardware setting appears. On the right side of the Value box are two smallarrows: one up and one down. You must use th

Seite 4 - Configure Hardware Dialog Box

Configure Hardware Dialog BoxNext, the Configure Hardware dialog box opens. The parameters in this dialog box are usually set only once --when OOIBase

Seite 5 - Specifications

Save the spectrometer configuration file by choosing Spectrometer | Save Configuration As from the OOIBase32menu. You can rename the file or use the d

Kommentare zu diesen Handbüchern

Keine Kommentare

Ocean-optics DAQ700 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Ocean-optics DAQ700 herunter. Ocean Optics DAQ700 User Manual [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Ocean-optics DAQ700